diff --git a/1209/4250/index.md b/1209/4250/index.md new file mode 100644 index 00000000..d3a24b53 --- /dev/null +++ b/1209/4250/index.md @@ -0,0 +1,9 @@ +--- +layout: pid +title: UkiUkiduino +owner: Unicollabo +license: LGPL-2.1 (firmware), CERN-OHL-P-2.0 (hardware) +site: https://github.com/project-unicollabo/UkiUkiCore +source: https://github.com/project-unicollabo/UkiUkiCore +--- +Arduino Uno R3 form factor board based on the Microchip AVR64DU32 (native USB 2.0 full-speed, USB-C connector). This PID is used by sketches built with UkiUkiCore, an Arduino core derived from DxCore, and enumerates as a USB CDC serial port. The USB bootloader of the same board uses PID 4251. KiCad design files are in the `hardware/UkiUkiduino` directory of the source repository. diff --git a/1209/4251/index.md b/1209/4251/index.md new file mode 100644 index 00000000..2c68fa74 --- /dev/null +++ b/1209/4251/index.md @@ -0,0 +1,9 @@ +--- +layout: pid +title: UkiUkiduino Bootloader +owner: Unicollabo +license: LGPL-2.1 (firmware), CERN-OHL-P-2.0 (hardware) +site: https://github.com/project-unicollabo/UkiUkiCore +source: https://github.com/project-unicollabo/UkiUkiCore +--- +USB CDC bootloader of the UkiUkiduino, an Arduino Uno R3 form factor board based on the Microchip AVR64DU32. It needs a PID separate from the application (PID 4250) so that the Arduino IDE can find the bootloader port after the 1200 bps reset. The bootloader source is in `megaavr/bootloaders/usbcdcboot` of the source repository. diff --git a/1209/4254/index.md b/1209/4254/index.md new file mode 100644 index 00000000..fd12ad23 --- /dev/null +++ b/1209/4254/index.md @@ -0,0 +1,9 @@ +--- +layout: pid +title: UkiUkiduino Pony +owner: Unicollabo +license: LGPL-2.1 (firmware), CERN-OHL-P-2.0 (hardware) +site: https://github.com/project-unicollabo/UkiUkiCore +source: https://github.com/project-unicollabo/UkiUkiCore +--- +Pro Micro form factor board based on the Microchip AVR64DU32 (native USB 2.0 full-speed, USB-C connector). This PID is used by sketches built with UkiUkiCore, an Arduino core derived from DxCore, and enumerates as a USB CDC serial port. The USB bootloader of the same board uses PID 4255. KiCad design files are in the `hardware/UkiUkiduinoPony` directory of the source repository. diff --git a/1209/4255/index.md b/1209/4255/index.md new file mode 100644 index 00000000..9f204875 --- /dev/null +++ b/1209/4255/index.md @@ -0,0 +1,9 @@ +--- +layout: pid +title: UkiUkiduino Pony Bootloader +owner: Unicollabo +license: LGPL-2.1 (firmware), CERN-OHL-P-2.0 (hardware) +site: https://github.com/project-unicollabo/UkiUkiCore +source: https://github.com/project-unicollabo/UkiUkiCore +--- +USB CDC bootloader of the UkiUkiduino Pony, a Pro Micro form factor board based on the Microchip AVR64DU32. It needs a PID separate from the application (PID 4254) so that the Arduino IDE can find the bootloader port after the 1200 bps reset. The bootloader source is in `megaavr/bootloaders/usbcdcboot` of the source repository. diff --git a/org/Unicollabo/index.md b/org/Unicollabo/index.md new file mode 100644 index 00000000..ca1ad74c --- /dev/null +++ b/org/Unicollabo/index.md @@ -0,0 +1,9 @@ +--- +layout: org +title: Unicollabo +site: https://github.com/project-unicollabo +--- +Unicollabo (a supporters' team of Ukiuki Unico) develops UkiUkiduino, a series of open source Arduino-compatible boards based on the Microchip AVR64DU32, made as fan merchandise for the VTuber Ukiuki Unico. + +- [YouTube](https://www.youtube.com/@ukiuki-ch) +- [X](https://x.com/ukiuki_unico)